How To Playback On A Xx70a: Airsight Outdoor Ptz P2p Hd Ip Camera

XX70A: AirSight Outdoor PTZ P2P HD IP Camera with One Button Setup - Quick Installation Guide (Using Safari Browser)

Introduction

You can access your photographic camera's alive video feed from a web browser on your Macintosh computer past following these steps.

Setup instructions for your tablet or smartphone can be found hither.

Stride ane: Hardware Installation

We strongly recommend setting up your photographic camera wirelessly via the APP first using the One Button Setup feature.

If you adopt to instead setup from your MAC you lot will need to use a network cable (wired) beginning before you try to use it wirelessly.

1. Install the Wi-Fi antenna.
2. Plug the ability adapter into the camera and into an Air-conditioning outlet.
3. Plug one end of the network cablevision into the camera, and the other end into your router/switch.

Step 2: Software Installation

Install the IP Camera Search tool for Macintosh computers located here.

• Click on the Downloads icon in the Dock at the bottom of the display and cull Open in Finder

• Right click OR press CONTROL + Click on the SearchIPCam for MAC Os v1.0.0.1.zip icon listed in the Downloads folder and choose OPEN to extract the contents of the file

• Click on the newly created SearchIPCam for MAC Os v1.0.0.1 folder to open

• Click the SearchIPCam icon and so drag the icon out of the Finder window and into the Applications Binder

• Click the SearchIPCam icon to instantly run the program

Create a Desktop Shortcut

To create a shortcut on your desktop:

• Click on the Downloads icon in the Dock at the lesser of the display and choose Open in Finder

• Click on the newly created SearchIPCam for MAC Os v1.0.0.one folder to open

• Click the SearchIPCam icon so File and cull Make Alias in the drop down

• Elevate the newly created shortcut to your Desktop

Create a Dock Icon

To create a Dock icon:

• Click on the Downloads icon in the Dock at the bottom of the display and choose Open in Finder

• Click on the newly created SearchIPCam for MAC Os v1.0.0.1 binder to open

• Click the SearchIPCam icon and then drag the icon out of the Finder window and onto the Dock

Step 3: Real-fourth dimension Video Demonstration

• Click on the "SearchIPCam" Dock icon or desktop shortcut to launch the SearchIPCam Tool.

• Double-Click your camera in the list to launch the photographic camera's Web Interface in a Safari web browser

Username: admin

Password: exit this field blank

Stride 4: How to employ your camera Wirelessly

Y'all should fix your camera using a network cable (wired) first before you lot attempt to use information technology wirelessly. (See Hardware Installation above).

• Make sure your router is a wireless router.
• Make sure the Wi-Fi antenna is installed on the camera.
• Determine if your router uses encryption, (see your router's owner'southward manual for how to exercise this), if information technology uses encryption, note the share central.
• Login to the camera using the SearchIPCam Tool, like you did when setting up with a network cablevision.
• Click the SETTINGS icon at the pinnacle of the screen:

When y'all run into the screen below:

1. Choose the "Network Settings" card
2. Click "Wireless Settings" carte
3. Click on "Search" button
4. Once your WiFi Network Name (SSID) populates in the Wireless LAN box, click on it.
5. Ensure the NETWORK Blazon, SAFE Style, and ENCRYPTION type match what is listed above.
6. Enter your WiFi Network Password or Share Key
7. Click SAVE

Expect for your camera to FULLY REBOOT - Once information technology is done center itself - UNPLUG THE Ability Cablevision FIRST - then disconnect the network cable and plug the power back in.

Source: http://kbase.x10.com/wiki/XX70A_Getting_Started_on_a_MAC

Posted by: bibbinscign1993.blogspot.com

Share this post